Xiaomi Redmi Buds 3 Pro LED Light Status
Earbuds
- White light flashing: Earbuds ready to pair to any device.
- White light on: Earbuds charging.
- White light off: Earbuds fully charged.
- White light on while resetting: Earbuds resetting.
- White light flashing while resetting: Earbuds resetting.
Charging case
- White light flashing: Case have low battery.
- White light on for about 5 seconds: Case fully charged.
- White light on: Case charging.
How to Reset Xiaomi Redmi Buds 3 Pro ?
Step 1: Place the earbuds into the charging case.
Step 2: Press and hold the multifunction touch button on both earbuds for at least 10 seconds, until a white light turns on.
Step 3: Clear the pairing information of the device to pair.
Step 4: After that, a light on the earbuds will start flashing, and the resetting will be done.
Some Common Earbuds Problems
Left / Right / One side of the earbuds have stopped working
If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:
1. Try charging the earbud that is not working or both, placing them in the charging case.
2. Try factory resetting the earbuds.
3. Check if the earbuds are operating within a normal working range.
If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.
Left / Right / One side of the earbuds has low volume
If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:
1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
Microphone not working
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.
Xiaomi Redmi Buds 3 Pro earbuds not connecting to Windows/laptop/PC
If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:
1. Try disabling Bluetooth from nearby devices – then activate pairing mode of the earbuds, pair and connect earbuds from Settings – Bluetooth & other devices – Add a new device – elect Bluetooth,
2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.
3. Try resetting the earbuds.
FAQs
Are Xiaomi Redmi Buds 3 Pro waterproof?
The Xiaomi Redmi Buds 3 Pro earbuds have the IPX4 certification, which means they’re dustproof, splash and sweat-resistant.
Does Xiaomi Redmi Buds 3 Pro have a microphone?
Yes, the Xiaomi Redmi Buds 3 Pro have integrated microphones.
Do Xiaomi Redmi Buds 3 Pro have low latency/gaming mode?
No, the Xiaomi Redmi Buds 3 Pro don’t have a low latency/gaming mode.
How to know when Xiaomi Redmi Buds 3 Pro are fully charged?
When the earbuds are charging, a white light turns on. When fully charged, that light turns off.
Can Xiaomi Redmi Buds 3 Pro connect to PC and Laptop?
Yes, the Xiaomi Redmi Buds 3 Pro can connect to PCs, laptops, and tablets.
We hope you now know how to operate the earphone from the above Xiaomi Redmi Buds 3 Pro Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.
In case you want or need to contact the Xiaomi company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!
